Chapter 1
Getting Started
Optional setup tasks 17
Attach the pen tether
The CL920 digitizer pen includes a tether so that you can attach the pen to your tablet to
help prevent misplacing it.
To attach the pen tether:
1. Slip one end of the tether through the hole at the end of the pen, then pull the pen
through the loop until it is tight.
2. Slip the other end of the tether through the attach point on the CL920, then pull the pen
through the loop until it is tight.
You can purchase additional pen tethers from the
Motion Computing
Accessories
page.
Insert the digitizer
pen battery
The digitizer pen is included with your CL920 and comes in a separate package along with
an AAAA battery and pen tether.
To insert the pen battery:
1. Unscrew the pen cap located at the top of the digitizer pen.
2. With the plus side of the battery toward the pen tip, insert the battery in the cavity of the
digitizer pen.
3. Screw the digitizer pen cap in place.
Connect the tablet to a docking station
The CL-Series docking station for the CL920 is a separate accessory that you can purchase
from the
Motion Computing Accessories
page.
The docking station includes:
•
Three USB ports to connect a keyboard, mouse, or other USB devices
•
An Ethernet port to connect to a local network
•
A pen holder with a pen tether attach point
Connect the tablet to a display monitor
You can connect an external monitor to the CL920 Tablet PC using the Micro-HDMI port
(located on the left side of the tablet) with an appropriate connector, such as a DVI-HDMI
adapter.