11
3
Battery Installation Instructions of Boarding Device
The lifting platform can also be powered by the battery of PL001 wheelchair. There is one
changeover plug in the accessory, and proper plug can be chosen and inserted and then placed
into the battery pack.
1.
As shown in the figure. Before installing the battery, connect
the power plug on the boarding device to the battery, and
press the UP button on the manual controller to raise the
boarding device by about 50cm.
2. Insert the two screws on the battery into the corresponding holes on the frame and tighten the
knob. Make sure that the battery is installed in the same direction as Figure B.
3. In order to prevent the power plug from falling off during use,
please fasten the buckle and ensure that the power plug is tightly
inserted. Turn on the power switchbattery is installed in the same
direction as Figure B.
4. When the boarding
device is not used for a
long time, please p turn
off the power switch..
C1
B1
A1
B2
B3
C2
D1
Use Instruction
Содержание Elev8
Страница 1: ...User Manual...