- 6 -
2.1 PROGRAM/SET-UP OPTIONS (for Reference-Only)
IMPORTANT!
Set-up of your Motion Concepts power positioning system, using the M290 remote is restricted to
Qualified Technical Service personnel only. Section 2.1 below identifies the various set-up/programming
options available via the M290 Remote. If you require changes beyond your existing seating system
set-up, please contact your local Dealer or Service Provider provider for further assistance.
1
Note:
Access to the identified Program/Set-up Options in the M290 remote is password protected, and
restricted to Qualified Technical Service personnel only.
WARNING!
Risk of system damage or serious personal injury
Incorrect programming could result in an unsafe wheelchair set-up.
Your qualified Dealer or Healthcare Professional is responsible to ensure that the seating system is set-up
properly and safely to meet your individual requirements;
Always
ensure that you are comfortable with all
safety and functional aspects of your power positioning system prior to use.
If you have questions or concerns regarding your existing program settings, or any of the available program
options, please contact your local Dealer or Service Provider for assistance.
2.0 PROGRAM MODE for the M290 REMOTE
2
Note:
the M290 software version is also indicated briefly on the display screen when the remote attendant
control is intially powered on.
PROGRAM OPTIONS
1
DESCRIPTION
Actuator
1
Actuator (motor) functions may be individually programmed (i.e.; turned on and off)
Speed
1
Sets the individual actuator/motor speeds in either motor direction
Tipsy
1
Sets the safety limits & lockout angles for the wheelchair/seating system. Programmable
angle settings for Home Position, Reduce Drive Speed, Drive Lockout and Max Angle.
ATT SW
1
Configures the operation of the power positioning system (actuator motors) thru the attendant
switch (8-way switch); Switch assignments may be programmed to operate in Direct Mode,
Toggle Mode or a Combination of both
Configuration
1
‘On/Off’ settings for miscellaneous system features
(e.g. Run Display, Angle Display, Elevate
Slow, Beep On/Off, etc..)
Limit
1
Sets Critical Limits (seating system limits) for the MPSS.
Version
1,2
Indicates current software version of the M290. In order to properly diagnose any potential
issues, it may be necessary to identify the software version of the remote attendant control.
Date & Time
1
Sets the Date and Time visible on the M290 screen display
