![background image](http://html.mh-extra.com/html/motion-computing/cft-003/cft-003_user-manual_1837817037.webp)
Chapter 2
Using your C5t/F5t
Setting display options 32
Extended with tablet primary
The “extended with tablet primary” display scheme expands the desktop area across the
tablet and external monitor, with the tablet as the primary display. You can set the external
monitor to use a different display resolution than the tablet.
Monitor only
The “monitor only” display scheme uses the external monitor only.
Tablet only
The “tablet only” display scheme uses the tablet display only.
Connect an external monitor
To connect an external monitor to the C5t/F5t, you use the CFT-Series docking station,
which is sold separately.
To set up an external monitor:
1. Connect the monitor cable from the external monitor into the CFT-Series docking station
according to the
CFT-Series Docking Station User’s Guide
.
2. Plug in the external monitor and turn it on.
3. If necessary, install software and drivers for the monitor. See the manufacturer’s
documentation for more information.
4. Open
Motion Dashboard
.
5. Tap
Display
.
6. Select a
Display Scheme
.
7. If your Tablet PC doesn’t respond to touch, follow the steps below to
enable touch on the
correct display
.
Resetting touch after adding other monitors
After setting up an external monitor, touch might be disabled on your tablet because
Windows® 7 assumes that the external display is for touch input. You can enable touch on
the correct display from the Motion Dashboard by following the procedure below. You’ll
need a keyboard.
To enable touch when your tablet is connected to an external display:
1. If it isn’t already, attach a keyboard to the tablet.
2. Open
Motion Dashboard
.
3. Tap
Pen & Tablet
.
4. Tap
Tablet PC Settings
.
5. Select the
Display
tab.
6. Tap
Setup
next to “Configure your pen and touch displays.”