Motion Composites Veloce Скачать руководство пользователя страница 19

EDITION - V 1.0

19

   

User

Manual

12    

Motion Composites limited 

warranty

A. 

Frame – 5 years

Motion Composites warrants the wheelchair frame and cross 
braces against defects in materials and workmanship for five 
years from the date of purchase. 

B. 

Components – one year

Motion Composites warrants all Motion Composites-made 
components against defects in materials and workmanship for 
one (1) year from the date of purchase, except for parts listed 
below.

C. 

Limitations and exclusions

1

  

Motion Composites covers the following items for 30 days:

•     tires and tubes for front or rear wheels, upholstery (including 

cushions, seat slings, armrest upholstery) and push-handle 
grips; 

2

  

This warranty does not cover:

•     damage arising from normal wear and tear or from other 

circumstances beyond Motion Composites’ control; or

3

  

The foregoing warranty shall not apply if:

•     the original Motion Composites serial number tag has been 

removed, altered or defaced; or

•       the wheelchair has been subjected to negligence, accident, 

improper maintenance, storage or operation as required by 
your Motion Composites Owners Manual, commercial or 
institutional use, misuse or abuse, including, but not limited 
to, exceeding the maximum weight capacity of 250 pounds 
(113,4 kg); or 

•       the wheelchair has been damaged by improper repairs or 

repairs made to any component without the express written 
consent of Motion Composites; or

•       the wheelchair has been modified without Motion 

Composites’ express written consent, including, but not 
limited to, modification through the use of unauthorized 
parts or attachments; or

•       the wheelchair has been used as a weight training 

apparatus; or

•     the wheelchair’s Transit Tie-Down System (TTDS) has been 

misused; if TTDS is not attached to the four tarpaulin bows 
identified and installed by Motion Composites.

4

     This warranty is extended only to the original consumer 

purchasers of Motion Composites’ product.

D. 

Our responsibility

Motion Composites’ sole obligation and your exclusive remedy 
under this warranty shall be limited to such repair and/or 
replacement. 

E. 

Warranty Service

If your wheelchair requires warranty service, please contact 
an authorized Motion Composites Dealer in Canada or an 
authorized international distributor.  In the event of a defect in 
material or workmanship, the Dealer or Distributor must obtain 
a return authorization (RA) number from Motion Composites.  
Motion Composites issues RA numbers only to authorized 
Motion Composites Dealers and Distributors. In the event 
that you do not receive satisfactory warranty service, please 
write directly to Motion Composites Customer Service at 519 
J-Oswald Forest, suite 101, Saint-Roch-de-l’Achigan, Qc, J0K 
3H0 or send an email at: [email protected]. Do 
not return products to our factory without our prior consent. 

CONSUMER 

NOTICE

1

     The foregoing warranty is exclusive, and in lieu of all other 

express warranties, whether written or oral, express or 
implied. Motion Composites shall not be liable for any 
consequential or incidental damages whatsoever. By 
registering your Motion Composites wheelchair, you will be 
deemed to agree with all provisions of this warranty.

2

       It is forbidden to alter or extend the foregoing 

express warranty or to waive any of the limitations or 
exclusions.  

 

Содержание Veloce

























Отзывы: