Motic SMZ-171 BL, Инструкция по эксплуатации

Страница: 11 / 22

10
4.1.3 Trinocular tube for the SMZ-171T
● The procedures for adjusting the interpupillary distance and securing the eyepieces are the same for
the trinocular tube as they are for the binocular tube.
● By turning the knob at the left side of the trinocular tube, all the light from the right eyepiece tube will
be deflected into the phototube for the attached imaging device.
● At the top of the trinocular tube, there is a locking screw that is used to secure the adapter for the
imaging device. After fitting the adapter, this locking screw should be tightened.
● N-WF eyepiece, high eye-point 10X (Ø23), diopter adjustable, interchangeable with biological
eyepieces
4.2 Stand
Three different stands are available for the SMZ-171:
4.2.1 LED stand with Pole version (Fig.1)
● New stand with reflector design to reach more even illumination and lower temperature; the angle of
reflector can be adjusted by a draw-rod frontwards the left hand of the base. (Fig.7)
(Fig.7)
● LED or fiber optical illumination could be selected with a switch on the stand. When fiber illumination
is used, pull the draw-rod backwards the left hand of the base. (Fig.8)