MACROSCOPIC OPERATION
6.
Rotate the nosepiece to place the 1X macro objective into position over the specimen. Be
sure the objective “clicks” into position (the 1X macro objective in the only objective that can
be used in macro mode).
7 (SILVER3H-B only).
Adjust the Siedentopf binocular head until one perfect circle is seen
in the field of view. This is accomplished by moving the eyepiece tubes up and down in an
arc-like motion, similar to adjusting binoculars.
8.
While viewing through the eyepiece(s), rotate the coarse focus knob slowly and carefully
to bring the specimen into focus. The specimen may require some centering in the field of
view at this time. By using the fine focusing knob, slowly and carefully refine the focus to
clearly observe the fine details of the specimen.
9 (SILVER3H-B only).
Set the diopter adjustment, which is designed to help compensate the
difference between the user’s eyes. To adjust, first bring specimen into perfect focus by
using the coaxial focusing knobs while using your right eye only (close your left eye). Now,
using your left eye only (close your right eye), adjust the left eye diopter only (do not adjust
the focus control knobs) until the specimen is in sharp focus. The diopter is now set and no
further adjustment to the diopter is needed until a new operator uses the scope.
SILVER
3H
SERIES
| 11
SILVER
LINE
