Motic Instruments Inc. Canada
October 06, 2006
21
Installing the lamp
Fig. 17
•
In order to prevent electric shock always turn the power switch off, and unplug the
power cord before installing or replacing the lamp.
•
Loosen the lamp house cover clamp screw and remove the cover and the lamp
socket assembly. See Fig. 17
•
Loosen the lamp clamp screws at both ends of the lamp socket and remove
“dummy lamp” installed.
•
Before handling the lamp, read the handbook supplied with the lamp.
•
When installing the lamp, avoid applying force that might cause the lamp to break.
•
Match large and small diameter metal ends on lamp and lamp socket.
•
Insert the lamp into the lower flexible lamp clamp base and tighten the clamp
screw. See Fig.18a
•
Insert the lamp into the upper lamp socket hole supported by the metal plate with
the cooling fins and fasten the clamp screw. See Fig.18b
