51
Mother’s Choice
|
convertible car seat 0-8 years
10. To tighten the installation, begin by
pushing down into the car seat with
one hand using maximum force
whilst simultaneously pulling up on
the vehicle seatbelt, feeding the belt
slack into the retractor as shown in
image I
. Continue this step until the
installation is as firm as possible.
11. To finish the install, tighten the
top-tether strap to remove all the
remaining slack. Be careful to not
over tighten, only remove slack.
To ensure this, check to make
sure the base is not lifted and is
still flat, sitting evenly across the
vehicle seat.
12. Once finished, gather the excess
webbing and store it in the tether
bag provided as shown in
image K.
NOTE:
If the car seatbelt is not long enough to secure the child
restraint, do not use seat belt extenders.
NOTE:
There is an option to install seat using seat belt with accessory
locking clip. Please see instructions provided with locking clip for
installation.
IMPORTANT:
always attach the top tether strap to the child restraint
upper anchorage in your car. Refer to owner’s manual.
I
J
K
DET
AILED GUIDE
MCh_INFINITY_19994_20054_20026_IM_FA_2.indd 51
MCh_INFINITY_19994_20054_20026_IM_FA_2.indd 51
12/5/21 3:07 pm
12/5/21 3:07 pm
