15
Mother’s Choice |
prime AP convertible booster seat
Vehicle metal
structure
Spacer(s)
(if required)
Attachment bolt
Anchor fitting
Vehicle trim
Centre line of
seating position
200mm
min.
FOR SEDANS ONLY:
Vehicle metal
structure
Spacer(s)
(if required)
Attachment bolt
Anchor fitting
Vehicle trim
Lock washer
Nut
Reinforcing
washer
For cars fitted with a child restraint
upper anchorage point:
Locate the upper anchorage point behind the
rear seating position (consult the car owner’s
handbook for the location of the upper anchorage
point). Remove the thread plug from the parcel
shelf/floor/roof and install the attachment bolt as
shown in
Figure 1.
CAUTION: DO NOT OVERTIGHTEN THE
ATTACHMENT BOLT. OVERTIGHTENING
MAY FRACTURE OR BREAK BOLT.
MAXIMUM TORQUE IS 20 Nm.
For cars not fitted with a child
restraint upper anchorage point:
For sedans only:
Drill a 9mm diameter hole in the parcel shelf on
the centre-line of the seating position as shown
in
Figure 2. Install the ancho
r bolt as shown in
Figure 3.
It is recommended that this installation
be carried out by a child restraint fitting station or
licenced motor mechanic.
1
2
3
ANCHORAGE FITTING INSTALLATION
For vehicles other than sedans:
In Australia, consult your nearest child restraint
fitting station or traffic authority for vehicle
inspection to find the best, correct position for
the placement of the upper anchorage point, and
for the correct attachment bolt length and use of
spacers. In New Zealand, consult the agent for
the vehicle.
PREPARING VEHICLE FOR YOUR SEAT
