in use
Pull the tab at the back of the seat to release the locks
and lift the seat unit away from the frame.
fig 2
Engage the brake and lower the car seat into place.
The car seat should be facing the handlebar of the travel
system. The base of the car seat should engage with the
connection points on the chassis frame. Push the car seat
until it clicks into place then pull gently on the handle of
the car seat to make sure it is secure. The handle can then
be placed in the upright or back position.
fig 3
after use
11
12
removing the car seat
To remove the car seat, first engage the brake.
Press the release clips located below the connection
points on either side.
Pull the tab at the back of the car seat to release the
locks and lift the car seat away from the frame.
fig 1
fig 2
in order to attach the car seat, you first need to remove
the seat unit. Press the release clips located below the
connection points on either side.
fig 1
attaching the car seat
QUANTUM D3.indd 7
31/10/07 15:19:13
