10
#13965-7-
MC Orlando 2 in 1 Cot Bed
10-12
Instruction Manual & User Guide
STEP 2 - LOWERING THE MATTRESS BASE (cont)
• Remove the four (
4
) 32mm allen head bolts (
A
) securing the mattress
base to each end panel and carefully shift the mattress base (
B
)
to the lower position, as per
Figure 10.
• Refit the mattress base in the lower position using the four(
4
) 32mm allen head bolts.
•
Tighten all bolts, (mattress base and side panels).
•
Fit two (2) 15mm blanking bolts and caps (
A
)
to the upper position mattress base mounting
holes in each of the end panels,
as per
Figure 11.
•
Stand the cot upright,
as per
Figure 12.
•
Your cot is now ready to use,
as per
Figure 12.
B
A
Figure 10
Figure 11
Figure 12
Tools/Hardware
required:
Assembling: Orlando 2 in 1 Cot Bed (cont)
A
A
A
