Motech LPS 305, Руководство пользователя

Страница: 19 / 22

16
Command Description Example
OUT 0=+/- output off OUT0
1=+/- output on OUT1
TRACK 0= independent TRACK0
1= tracking from ch1 TRACK1
2= tracking from ch2 TRACK2
STATUS Working status(see note7) STATUS
CALI 0=Reset CALI0
1=begin calibration CALI1
2=input calibration parameter CALI2 9.574
MODEL Display model no. MODEL
VERSION Display version no. VERSION
HELP Display command list HELP
BEEP 0= beeper function off BEEP0
1= beeper function on BEEP1
VDD 0= digital output off VDD0
3= digital output 3.3V VDD3
5= digital output 5V VDD5
NOTE:
1. All RS232 commands are case-nonsensitivity ASCII codes.
2. Use async framing 8 data bits, no parity bit, 1 stop bit.
3. Bit rate=2400bps.
4. Every command string is terminated by CR or LF or BOTH (carriage return)
5. There is one command allowable in a command string.
6.
A command string enters before “OK” prompt will be reject & no function.
7. STATUS operation explanation:
After a TPT-
3025 accept A “STATUS” command, it will display a decimal number in ASCLL Convert
this decimal number to binary form each bit indicate a action/status:
Bit 0: channel 1 0=CV 1=CC
Bit 1: channel 2 0=CV 1=CC
Bit 3,2: 00:independent
10:tracking to channel 1
11:tracking to channel 2
Bit 4: 0:digital output off
1:digital output on
Bit 5: 0:digital output 5V
1:digital output 3.3V
Bit 6: 0: +/- output off
1: +/- output on
Bit 7: 0:nothing
1:digital output overload
Bit 8: 0:fan off
1:fan on