Data_Indicator Pro
User manual
Revision 210224
Page 23
4.2. Sensor Gauges and options:
d
- The slider at each gauge indicates the current reading of a
measurement value selected in
Gauges display values
(here the oil
quality as an integer value) at the time pointed by cursor at XY
graph for the corresponding sensor.
slider
digital display of the value
sensor number (here sensor No. 2) with a color mark corresponding to
data color for this sensor at XY graph.
If a switch checkbox is checked, the measurement values for the
sensor are shown in XY graph, otherwise they are hidden.
Fig. III-33. Gauge for sensor Nr. 2
For oil quality measurement values gauge scale is divided into colour regions to
indicate oil condition:
- green for “usability region”,
- yellow for “warning region”, - whereas temperature
- red for “danger region”, values are displayed
- magenta for “fault region”, without slider.
Fig. III-34 a. Examples of gauges for oil quality
Fig. III-34 b. Gauge for oil temperature
The following options allow to setup displayed values and scales at gauges:
Gauges display values
:
- only the measurement values selected before logfile loading at
“
XY graph displayed values”
check boxes (see III, 4.1) are
enabled here, other values are greyed out.
Fig. III-35.
Gauges scale
:
- the gauge scale is set automatically for the selected gauge
values.
Fig. III-36.