Anti-Lost Companion
with Bluetooth
®
4.0
Taking a Remote Photo
1. Open the BLE Anti-Lost app.
2. Make sure Anti-Lost Companion and your mobile device are connected and
within working range.
3. Double press the Pairing Button on the Anti-Lost Companion to have the BLE
Anti-Lost app enter Photo Mode.
4. Single press the Pairing Button to take a picture.
5. Double press the Pairing Button to exit Photo Mode.
Replacing the Battery
If the battery is low, the red LED on the Anti-Lost Companion will illuminate.
To replace the battery:
1. Open the battery compartment by turning the battery compartment cover
counter-clockwise with your fingers or a coin.
2. Take out the old battery.
3. Insert a new battery.
4. Replace the battery cover.
Important:
- Be sure the plus (+) side of the battery faces up.
- Use only a CR2032 button cell battery.
Notes:
Actual battery life will vary depending on usage.
Troubleshooting Q&A
Can't find or successfully install the MOTA Anti-Lost Companion app onto your
mobile device?
For Android devices, please:
- Check that your Android version is 4.3 or higher.
- Ensure your device's Bluetooth is Bluetooth 4.0 and that it is enabled.
6
