Mosquito Sentry GS388D, Руководство по эксплуатации

Страница: 7 / 16

TIPS FOR PROPER USE OF YOUR MOSQUITO SENTRY
Never use any material other than 100% natural Mosquito Sentry Repellent in the unit.
This system is designed to reduce the repellent into submicron particles and disperse
them over a wide area. Filling the unit with chemicals, pesticides or other products will
damage the unit and may cause serious injury due to inhalation.
The Mosquito Sentry is designed to protect your average size patio. In windy
conditions, it may be necessary to move the unit closer to your sitting area.
TROUBLESHOOTING
If your Mosquito Sentry is not working correctly, please check the following causes:
TROUBLE PROBABLE CAUSE SOLUTION
Mosquito Sentry does not
operate. Power cable not plugged in Plug in power cable.
The power light is on, but
there is no mist. No repellent in reservoir Fill tank with repellent.
The repellent mist produces
an unpleasant smell. New machine Open the reservoir and leave
it for 12 hours in a cool, dry
place.
Dirty reservoir or the product
is left in the reservoir for too
long. Clean the reservoir and
change the repellent.
The power light is on, but the
Mosquito Sentry doesn’t work. Too much repellent in the
base Pour out some repellent from
the base.
The output volume of the mist
is low, or the unit is blowing
bubbles. The transducer is dirty. Clean transducer with a soft
brush.
Repellent mixture may be too
strong. Add 16 oz. of water to the
reservoir.
Abnormal noise Vibrations in reservoir when
level is too low Fill the reservoir.
Unit is on an unstable surface. Move the unit to a stable, flat
surface.
7 7