7
Figure 5-4
Connecting an AC output power cable (1) (unit: mm)
Step 3
Insert AC output cable (L, N, PE) into the cable gland and the adapter, as shown in Figure 5-6.
Figure 5-5
Connecting an AC output power cable (2)
Step 4
Loosen the screws inside the coupling nut holes using a screwdriver, insert the core wires into
corresponding holes, and tighten the screws, as shown in Figure 5-6.
Tighten the screws to a torque of 0.7 N.m.
Figure 5-6
Connecting an AC output power cable (3)
Connect L to the hole L. Connect N to the hole N. Connect PE to
the hole PE .
Step 5
Check that all core wires are properly connected.
Step 6
Secure the adapter to the coupling nut
.
Tighten the adapter to a torque of 1~2 N.m.
Step 7
Secure the cable gland to the adapter, as shown in Figure
5-8.Tighten the cable gland to a torque of 5 N.m (You need to use some tool to achieve this torque).
Figure 5-7
Connecting an AC output power cable (4)
Step 8
Connect the AC output connector to the bayonet coupling of the AC output wiring terminal on the SF
series and rotate it clockwise until you hear a "click" sound.
Because no sufficient space is available on the right of the AC terminal, tighten the terminal using the left hand.