Adjust to what version of measurement you wish, and turn the scale right side
up, so all four rubber feet of the scale are flat on the floor.
Please do not use the scale on carpet, but a smooth, vibration free surfaace will
yield the best measurement.
Mode Selection
1.
Turn the scale over to set the desired measurement modes.
2.
Press the right most button in the recessed area to the left of the speaker
to select ON or OFF, (for voice on or off).
3.
Press the left button, the KG/LB button to select between kilograms (kg) or
pounds (Lb)
Note: ON: Turns talking function ON and keeps the weight value locked on the
LCD for several seconds.
-OFF: Turns talking function OFF and displays the Weight in real-time on the LCD
screen.
Weighing yourself
1.
Tap on the glass of the scale once with your foot to start weighing
yourself.
2.
Wait until [0.01 is displayed, (If talking function is enabled the scale will
say " OK, please step on the scale " ).
3.
Step onto the scale and wait for readout to stabilize.
4.
The weight will be displayed on LCD, (If the talking function is enabled the
scale will speak the weight)
Note: The primary reason for inaccuracy or malfunction is low batteries,
overload or operating on an unstable surface. Please keep this in mind and
maintain and operate your scale properly. This scale is a precision instrument
and must be handled with care. Note: The scale also will emit a single beep if
the scale is mistakenly interacted with. The scale as a default, will shut off until
interacted with again from non-use after 3 seconds.
You will hear a beep, signifying it is shutting off.
