Moser 4464, Руководство по эксплуатации

Страница: 9 / 72

ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9
Description of parts (Fig. 1)
A Heating plates, spring-loaded
B Handle
C Temperature control switch
D On/off switch
E Temperature display
F Locking fixture
G Mains cable with anti-twist device
Coating with CERAMIC, TOURMALINE and
NANO SILVER technology
The coated heating plates have an antistatic effect
and are gentle to hair. Negative ions close the scale
layer, creating a smooth, silky hair surface. They
lock in the natural moisture of the hair, thereby cre-
ating the ultimate shine. Negative ions also remove
the static charging of the hair surface. The innova-
tive nano silver technology sterilises bacteria.
Operation
· Connect to the mains power supply.
· Using the on/off switch (D), switch on the appli-
ance (Fig. 2). The preset operating temperature is
200°C.
· Use the switches (C) to set the desired operating
temperature (Fig. 3). The temperature can be set
between 150°C – 230°C.
· The appliance reaches the set operating tem-
perature within a very short time.
· After use, switch off the appliance with the on/off
(D) switch (Fig. 2). The temperature display will
go out.
· For safety reasons, the appliance switches itself
off automatically after 60 minutes. For continued
use, the appliance will need to be switched on
again (Fig. 2).
· Disconnect from the mains power supply.
· Allow the appliance to cool down.
· If needed, the appliance can be folded up
and locked in place so that it is easier to store
(Fig. 5).
Tips for successful styling
· Wash hair, rinse and dry well.
· Brush or comb hair.
· Section off individual strands of hair.
· At the hairline, place a section of hair between
the heating plates.
· Keep the straightener pressed together for a few
seconds and slowly pull it down the section of
hair away from the head.
Note: Do not leave the sections of hair in the
crimping iron for more than a few seconds, other-
wise this could damage the hair.
· Open the straightener and allow the section of
hair to slip out.
· Repeat the procedure until the desired result has
been achieved.
Cleaning and care
· Before cleaning the appliance, disconnect from
the mains and allow it to cool down.
· Do not immerse the appliance in water.
· Use only a soft cloth, which may be dampened
slightly, for wiping the appliance. Do not use sol-
vents or abrasives!
Disposal in EU countries
Do not dispose of the appliance with domes-
tic refuse. As part of the EU Directive gov-
erning the disposal of electrical and elec-
tronic equipment, the appliance is accepted
free of charge by local waste collection
points or recycling centres. Correct disposal
will ensure environmental protection and
prevent any potentially harmful impacts on
people and the environment.
Disposal in non-EU countries
At the end of its service life, please dispose
of the appliance in accordance with statutory
requirements.