Operation
Lighting
1. Make sure there is only a small amount of ash in the bottom of the bowl.
2. Place a layer of dry kindling or a natural fire-starter onto the center of the grate.
3. Place above that a layer of dry seasoned hardwood that is put to lengths no more than 3/4 the
diameter of the bowl.
4. Use a match to light kindling or fire-starter.
5. Using the hook that is provided and heat resistant gloves, replace spark guard once the kindling
or fire-starter is lit.
Tending the Fire
You may need to shift and/or add logs for an ideal experience.
Do NOT place a hot spark guard or hot fire pit tools onto combustible surfaces such as grass,
wooden deck or furniture.
1. Using the hook that is provided and heat resistant gloves, carefully remove spark guard.
2. While using a long handled fire pit tool, shift coals and logs to allow additional airflow.
3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an
existing fire.
4. Wait until glowing coals have developed before adding any additional wood. If addition wood is
required, place wood on top coals, be careful not to shift ashes.
Extinguishing
1. Allow fire to burn itself out.
2. Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fire
pit.
Care and Maintenance
Inspecting
This fire pit should be inspected on a regular basis to ensure product safety and longer product life.
Do NOT attempt to inspect this fire pit until the fire is COMPLETELY out.
1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If damage to any component is detected, do NOT operate until repairs are executed.
Cleaning
This fire pit should be cleaned on a regular basis to promote safer experiences and longer pr
o
duct
life.
Note: After repeated use, a slight discoloration of the finish may occur.
Do NOT attempt to clean this fire pit until the fire is COMPLETELY out and cool to the tou
c
h.
Do NOT use oven cleaner or abrasive cleaners as they will damage this product.
Do NOT clean any part of this fire pit in a self cleaning oven as it may damage the finish.
1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
4. Remove built-up creosote from components with a chimney cleaning product.
Storage
Do NOT move or store this fire pit until the fire is COMPLETELY out and cool to the touch.
1. Once the fire is out, coals are cold and fire pit is cool to the touch, remove ashes and properly
dispose.
2. Store the fire pit in a dry location to maximize product life.
3. Store assembled in a location away from children and pets.
Page 7 of 8
Содержание FSMVPT6022
Страница 5: ...HARDWARE AND PARTS Page 4 of 8...
