Mosa GE 14000 SXC/GS, Инструкция по эксплуатации и обслуживанию, каталог запасных частей

Страница: 20 / 52

GE 12000 SXC/GS
GE 14000 SXC/GS
© MOSA 1.1-09/05
M
22 Shutting down the motor
11/10/05 35921-GB
SHUT-DOWN FROM FRONT PANEL
For shutdown under normal conditions, proceed as
follows:
1 . Position the LOCAL START /REMOTE START
(I6) selector on LOCAL START; (only EAS
version) ;
2 . cut off power to all utilities by opening the load
switch or opening the thermal-
magnetic switch (Z2) (input lever in
downward position);
3 . Turn and push the accelerator lever (16) in
minimum position;
4 . allow the motor to run without any load for a few
minutes;
5. turn the key (Q1) to the OFF position.
☞
NB.: as a safety measure the
start-up key must be entrusted to
qualified personnel.
SHUT-DOWN FROM REMOTE
(only EAS version)
OFF
ON
START
The start-up selector (I6) LOCAL START / RE-
MOTE START enables the start-up and stop
controls for the selected position.
From the REMOTE START position, the start-
up key on the front panel is completely disabled;
to stop the generator, use the controls on the
TCM or EAS panel.
WARNING
!
The unit can also be shut down by means of the
TCM remote control or EAS panel.
1. Check that the EAS (B3) connector is connected
to the cable from the TCM or EAS panel.
2. Verify or position the LOCAL START / REMOT
START (I6) selector on REMOTE START.
3. SHUT-DOWN with EAS
The EAS panel automatically sees to controlling
the motor shutdown cycle, including the cooling
cycle.
4. SHUT-DOWN with TCM
Follow the same shutdown procedure described
for shutdown from the front panel using the TCM
key (Q1).
EMERGENCY SHUTDOWN
Turn the key (Q1) to the OFF position.