Mosa DSP 2x400 PSX, Инструкция по эксплуатации и обслуживанию, каталог запасных частей

Страница: 17 / 56

ASSEMBLY
CTL 35 -45 - 50 - 95
© MOSA 1.1-04/06
M
6.8
For assembling the generating set on the trolley CTL 35-45 -
50 - 95 please keep to following instructions:
1) - Lift thr generating set (by means of suitable hook)
6) - Assemble on the machine the towbar (5) complete of
foot with the M10x20 screws,nuts and washers.
7) - Assemble the axle (7) to the base of the machine with
the M10x20 screws and relative washers (two per
part) so that their supports coincide.
8) - Insert the wheel (9) on the axle then twist the
selfblocking nut (8).
9) - Pump the tyre (9) bringing the pressure to 4 atms for
the CTL 35-45-50 and 5/6 for the CTL 95.
10) - Lower the machine to the ground and place the parking
foot definitively (regulating at the best height).
ATTENTION
Do not substituite the original tires with other types.
ATTENTION
7
8
9
CTL 35-50
CTL 45
COMANDS
5
5
CTL 35-50
CTL 45-95
CTL 95
30/03/04 M6GB
The CTL accessory cannot be removed from the machine and used separately (actioned manually or
following vehicles) for the transport of loads or anyway for used different from the machine movements.
TRAILERS
The machines provided for assembling the CTL accessory (slow towing trolley) can be towed up to a maximum speed
of 40 Kms/hour on asphalted surfaces.
Towing on public roads or turnpikes of any type IS EXCLUDED , because not in possesion of the requirements by
national and foreign traffic norms.
Nota : Lift the machine and assemble the parts as shown in the drawing