Mortuary Lift Ultimate 1000 Lift ML-013P, Руководство по эксплуатации и техническому обслуживанию, Страница: 11 / 16

CREATE_ADDR
Button Access
How to Changing the Frequency on
Your Wireless Remote Control
For Model: ML-014W
Failure to read, understand or follow these procedures
may result in damage to your machine, severe injury
to yourself or others, or even death.
You will need power to your machine to train your
remote. DO NOT TOUCH the receiver board anywhere
else except the learn button.
WARNING
1. Remove cover from machine by removing four screws,
two on either side.
2. Remove the black electrical cover.
SETTING THE TRANSMITTER ADDRESS
The key fobs are all supplied from the
factory with a default signal and all
buttons programmed to the old signal
can be changed.
1. Use a paperclip to
press the CREATE_ADDR
button on the back of the case.
2. When the button is pressed,
a light will light up in the