MORTEX
PRODUCTS
INC
FORT
WORTH,
TX
76106
Page
5
furnace and the coil cabinet. If not, you may want to
use a shorter coil cabinet or use a saw to enlarge
the opening or the area where the furnace will be
positioned.
2. Remove the parts from the box. Check for any
damage before you start assembling the cabinet.
3. Place the rear panel against the left side panel and
install the three (3) screws.
4. Place the rear panel against the right side panel and
install the three (3) screws.
5. Place the coil cabinet top cover on the side and rear
panels so the three flanges on the top cover overlap
the side and rear panels. Install the nine (9) screws.
6. Turn the coil cabinet upside down and place the 1/2
inch seal strip along the bottom flanges of the coil
cabinet back and side panels. Refer to Figure 6.
7. Set the coil cabinet on top of the furnace and secure
to the furnace top cover with screws thru the three
holes on the rear panel flange.
8. Place the coil cabinet door mounting bracket under
the left and right side coil cabinet panel flanges. The
door bracket must be placed between the coil
cabinet side panel flanges and the furnace top
cover. Refer to Figure 6.
9. Install the remaining screws thru the holes provided
in the coil cabinet flanges to secure the coil cabinet
to the furnace top cover.
10. Slide the furnace on to the floor base. Push the
furnace back until the furnace casing is against the
rear flange.
11. Slide the furnace on to the floor base and follow the
instructions in the installation manual to properly
install the furnace.
12. Follow the instructions to properly install the cooling
coil.
13. Place the coil cabinet door into the two tabs
provided on the coil cabinet door bracket.
14. Push the door towards the coil cabinet and insert the
thumb screw into the hole provided at the top of the
door and tighten the screw until the door is securely
fastened to the coil cabinet.
NOTE: The installer must provide a strap that
attaches to the top of the furnace and is secured to
the alcove or closet wood framing
Figure 6: Coil Cabinet Door Bracket Location
Subject
to
change
without
notice
61MH0012
Copyright
by
Mortex
Products
Inc.
2009.
Supersedes:
®