xii
Electromagnetic Compatibility (EMC)
Electromagnetic compatibility with surrounding devices should be assessed when using the device.
An electronic device can either generate or receive electromagnetic interference. Testing for electromagnetic
compatibility (EMC) has been performed on the device according to the international standard for EMC for
medical devices (IEC 60601-1-2). This IEC standard has been adopted in Europe as the European Norm (EN
60601-1-2).
The device should not be used adjacent to, or stacked on top of other equipment. If the device must be used
adjacent to or stacked on top of other equipment, verify that the device operates in an acceptable manner in the
configuration in which it will be used.
Fixed, portable, and mobile radio frequency communications equipment can affect the performance of medical
equipment. See Table X-4 for recommended separation distances between the radio equipment and the device.
The use of accessories and cables other than those specified below, may result in increased emissions or decreased
immunity of the device.
Description
Part Number
LEAD SET WAM 10 WIRE BANANA AHA
9293-046-50
LEAD SET WAM 10 WIRE BANANA IEC
9293-046-51
REPLACEMENT LEAD SET WAM LIMBS BANANA AHA
9293-046-52
REPLACEMENT LEAD SET WAM LIMBS BANANA IEC
9293-046-53
REPLACEMENT LEAD SET WAM V1-V3 BANANA AHA
9293-046-54
REPLACEMENT LEAD SET WAM C1-C3 BANANA IEC
9293-046-55
REPLACEMENT LEAD SET WAM V4-V6 BANANA AHA
9293-046-56
REPLACEMENT LEAD SET WAM C4-C6 BANANA IEC
9293-046-57
LEAD SET WAM 10 WIRE CLIPS AHA
9293-047-50
LEAD SET WAM 10 WIRE CLIPS IEC
9293-047-51
REPLACEMENT LEAD SET WAM LIMBS CLIPS AHA
9293-047-52
REPLACEMENT LEAD SET WAM LIMBS CLIPS IEC
9293-047-53
REPLACEMENT LEAD SET WAM V1-V3 CLIPS AHA
9293-047-54
REPLACEMENT LEAD SET WAM C1-C3 CLIPS IEC
9293-047-55
REPLACEMENT LEAD SET WAM V4-V6 CLIPS AHA
9293-047-56
REPLACEMENT LEAD SET WAM C4-C6 CLIPS IEC
9293-047-57
COMBINER REPLACEMENT WAM LEADS 5 POSITION
9293-046-01