Mortara Surveyor S4, Руководство по обслуживанию

Страница: 31 / 67

MAINTENANCE AND CLEANING
25
Functionality Procedure
Li-Ion Battery Charger,
AC Power Pack, AC
Power Cord

Check for cracks, abrasive edges and other signs of damage.

Check that all connectors and AC cord length is unbroken and smooth along its
length.

Verify proper LED indicators during battery charging.
ECG Cables
Approved Cleaning Agents

Enzymatic detergent such as ENZOL (US) or CIDEZYME (outside the US).

Distilled water.

Disinfectant solution (such as CIDEX OPA, or a 10% solution of household
bleach (5.25% sodium hypochlorite) in distilled water).

Soft, lint-free cloths and/or soft-bristled brushes.

Protective gloves and eyewear.
Procedure
1. Disconnect the mobile monitor from its power source.
2. Put on gloves and protective eyewear.
3. Prepare the detergent according to the manufacturer's instructions, and also
the disinfectant solution, in separate containers.
4. Apply detergent to product using a soft, lint-free cloth. If material is dried on,
allow to sit for 1 minute. Do not immerse cable ends or lead wires in liquid as
it can cause corrosion.
5. Wipe smooth surfaces with the cloth.
6. Use a soft-bristle brush on visibly soiled areas and irregular surfaces.
7. Remove detergent from product using cloth dampened in distilled water.
8. Repeat as necessary.
9. Apply disinfectant solution on affected area using a soft cloth. Allow product to
sit for 5 minutes.
10. Wipe excess solution and clean product again with cloth dampened in distilled
water.
11. Allow 2 hours for drying.