Installing the Fireplace Insert Enclosure
PRODUCT SAFETY
THESE FIREPLACE INSERT ENCLOSURES ARE A LISTED COMPONENT FOR AND ARE
INTENDED FOR USE WITH THE MORSØ MODELS 5660 STANDARD AND 5660NA WOOD-
BURNING FIREPLACE INSERTS ONLY. DO NOT USE OTHER PRODUCTS NOT SPECIFIED OR
LISTED FOR USE WITH THESE ENCLOSURES.
WARNING:
IF THESE ENCLOSURES AND FIREPLACE INSERTS ARE NOT PROPERLY IN- STALLED, A
HOUSE FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THE IN- STALLATION
INSTRUCTIONS EXACTLY.
DO NOT ALLOW MAKESHIFT COMPROMISES TO ENDANGER
PROPERTY AND PERSONAL SAFETY.
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND
INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.
IT IS A GOOD IDEA TO REVIEW YOUR PLANS WITH THEM BEFORE BEGINNING THE
INSTAL- LATION. ASK YOUR MORSØ AUTHORIZED DEALER FOR HELP WITH LOCAL
OFFICIALS IF NEEDED.
WHEN INSTALLLED IN THESE FIREPLACE INSERT ENCLOSURES IN THE UNITED
STATES, THE MORSØ MODELS 5660 STANDARD AND 5660NA FIREPLACE INSERTS
MUST ONLY BE CONNECTED TO ONE OF THE SPECIFIC CHIMNEYS LISTED ON PAGE 4
OF THIS MANUAL.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE THE FIREPLAC IN-
SERT ENCLOSURE AND MORSØ MODEL 5660 STANDARD OR 5660NA FIREPLACE
INSERT. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE,
BODILY IN- JURY OR EVEN DEATH.
FOR FURTHER INFORMATION, REFER TO THE NATIONAL FIRE PROTECTION
ASSOCIATION ANSI/NFPA 211 STANDARD FOR CHIMNEYS, FIREPLACES, VENTS AND
SOLID FUEL BURN- ING APPLIANCES.
REFER TO THE MORSØ MODEL 5660 STANDARD OR 5660NA OPERATING INSTRUCTIONS
FOR INFORMATION ON THE PROPER USE AND MAINTENANCE OF THE FIREPLACE
INSERT.
WARNING:
THIS FIREPLACE INSERT IS NOT A FIREPLACE. BUILDING A FIRE IN THE EN- CLOSURE
WITHOUT THE MORSØ MODEL 5660 STANDARD OR 5660NA INSTALLED IS PRO- HIBITED
AND MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
2
