Mörser 23-4001, Руководство пользователя

Страница: 4 / 8

Pg 4
NOTE
The safety grid should be in front of the output gate at all times.
If the machine is jammed, e.g. by larger debris, ensure that the
plug is disconnected from the protective motor switch, before
dislodge the obstruction. Do not put your fingers or any object
through the mixer gate.
CLEANING / MAINTENANCE
Before cleaning the mixer, the plug must be removed from the
socket.
Open the lid and lift the mixing blades off the axle. The mixer
arms are removed easily without using tools.
Firstly wash the mixer arms and the entire mixing drum using
water. When cleaning has ended, place the mixer arms onto
the axle and close the lid.
TRANSPORT
During transportation of the Mörser Mixer it is recommended
that the mixer is placed on the four wheels, and the lid is closed
and securely locked with the rubber strap.
SAFETY
When using an extension cable, please observe of the following,
• Never use a longer cable than necessary.
• Always use a cable with a dimension of at least 1mm2.
• Never use the cable when it is rolled up. Always ensure it is
rolled out completely.
When mixing materials that emit unpleasant or dangerous
vapours and/ or dust, a dust controller is recommended.