morse MORSPEED 288-1, Руководство оператора

Страница: 3 / 8

Copyright 2019 - Morse Mfg. Co., Inc. Form PL288-1 (0315-____) (Updated 14 Jun, 2019 11:07 AM)
3
The Specialist In Drum Handling Equipment
Model 288-1
Fork Mount Drum Handler
Operator’s Manual for Morse
MOR SPEED
TM
Fork Mount Drum Handler Model 288-1
Serial Number 0315 to ____ (MMYY)
Machine Description
The Model 288-1 Fork Mount Drum Handler is designed to lift and transport:
Rimmed steel, fiber or plastic drum. •
Maximum capacity is 1500 Lb. (680 kg) per drum. •
Requires a minimum of 75 Lb. (34 kg) per drum to begin the gripping action. •
Drum height must be 24” (61 cm) or taller. •
Works with any diameter drum. •
Can be used with a straight walled or damaged drum. •
Option
Belted Backrest (part number 2523-P) pad equips
MORSPEED TM
forklift attachment
with a 12” (30.5 cm) wide fabric belt. It contacts the side of your drum to help
protect it from being marred in handling. It is available as a bolt-on accessory.
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work 1.
gloves, hard hat and other personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new Morse drum handler. 2.
The model 288-1 has a maximum capacity rating of 1500 Lb. (680 kg) per drum. 3.
Exceeding this rating or handling drums other than those mentioned above is unsafe
and could result in equipment damage, excessive wear or awkward handling.
When loading, unloading, operating, or maintaining your MORSE drum handler, 4.
always use care and good judgment. Maintain secure footing and a firm hold. Keep
hands and loose clothing away from all moving parts. Never allow anyone to be below
any part of a raised drum handler or drum. Read operating instructions and review the
pictures in the sales brochure before operation.
Because the Morse model 288-1 is a front-end attachment for a forklift, OSHA recommends that “… the truck (forklift) be marked to 5.
identify the attachment(s) and show the approximate weight of the truck and attachment combination at maximum elevation with load
laterally centered.” See center of gravity dimensions of model 288-1 on page 8 for calculating lost load on your equipment.
Prior to initial use, inspect all moving parts. Inspect for proper operation. Perform necessary load test, inspections, operator training, 6.
etc.