morsedrum.com
Copyright 2020 - Morse Mfg. Co., Inc.
Form OM905 (292192-______)
(Updated 20 Jan, 2020)
5
operator’s Manual for Morse < PILot > Power-Propelled Drum Pourer with scale
Model 905 serial number 292192 to ______
The Specialist In Drum Handling Equipment
Model 905
Power-Propelled Drum Pourer
with scale
Figure 5.1
Lift / Lower and tilt Control Levers (Figure 5.1)
Lift / Lower control lever is mounted near the base of
•
the steering arm. Push lever away from operator to lift a
drum, and pull lever toward you to lower a drum.
Tilt control lever is mounted near the base of the
•
steering arm. Pull this lever toward the operator to
rotate drum forward, and push lever away from you to
return drum rotate drum back.
Battery Disconnect (Figure 5.1)
A battery disconnect is mounted near the rear of the battery
compartment. Pulling the disconnect removes all power from
truck circuits in the event of an emergency.
Parking
When parking the truck, do not obstruct traffic lanes or
aisles.
Park the truck in its designated parking area.
1.
Raise the steering arm until vertical to apply the parking brake.
2.
Fully lower lift assembly.
3.
Turn key to off position. Remove key for added security.
4.
Pull out battery disconnect.
5.
Also see
further information
.
WARnInG
- Watch out for pinch points
Stay clear of moving parts. Operator should remain behind the controls during the lift operation.
Drum Holder Assembly
The MORcinch
TM
drum holder assembly (or “saddle assembly”) is the component on the < PILOT > Power-Propelled Drum Pourer that
is intended to hold the drum. The carriage assembly moves vertically along the mast, to position the MORcinch
TM
drum holder assembly
designed to secure a drum around it’s middle using a cinch chain and ratchet tightening system. The MORcinch
TM
drum holder accepts
accessories for handling a plastic drum, a fiber drum, or a smaller diameter drum (see options on page 3).