background image

The Specialist In Drum Handling Equipment

Model 82A-GT-125

Mobile-Karrier / Palletizer with Geared Tilt

and DC Power Lift

Operator’s Manual for Model 82A-GT-125 Morse Mobile-Karrier / Palletizer

Serial Number 0315 to ____ (MMYY)

morsedrum.com

Copyright 2022  -  Morse Mfg. Co., Inc. 

Form OM82A-GT-125 (0315-____) 

(Updated 14 Jul., 2022)

         

3

Machine Description

The Mobile-Karrier / Palletizer is designed to lift, transport, and dispense a 

ribbed 55-gallon (208 liter) steel drum with 22.5” (57.2 cm) diameter. The 

maximum capacity is 600 Lb. (272 kg).

Kit # 2690-P 

Hand Wheel

16” (40.6 cm) diameter  

Hand Wheel with 

speed knob.  Replaces 

standard pull chain to 

turn drum.

Kit # 3900-P

MORStop

TM

 Tilt-Brake

 

Automatically holds 

drum tilt angle until you 

move it.

ACCESSORIES

to 

Install on EXISTING Manual Tilt Drum Handler

55/30 Series Diameter Adapters

 for drum with diameter smaller than 22” (56 

cm).  To handle a smaller drum, insert the correct size Diameter Adapter into 

the standard drum holder.  See Diameter Adapter info at:  

https://morsedrum.com/products/diameter-adapters 

ONLY Diameter Adapters for drum with 17.5” (44.5 cm) diameter or smaller 

have integrated brackets to prevent drum slipping length-ways.

 

NOTE:

   For 30-gallon (114 Liter) PLASTIC drum, insert Diameter Adapter;  

 

AND

 install Bracket or Top Rim Clamp to prevent drum slipping.

IMPORTANT:  

To prevent 30 to 55 gallon (114 to 210 L) size plastic drum from 

slipping, you 

MUST

 install either Top Rim Clamp Kit or Bracket Assembly Kit. 

1.  Bracket Assembly Kit # 4556-P

 is 

required

 to handle a RIMLESS 

plastic drum (figure 2.1), and is also recommended for a fiber drum.  

The Bracket adjusts for a 31” to 39” (79 to 99 cm) tall drum. 

You can also handle a rimmed drum with the Bracket installed. 

2.  Top Rim Clamp Kit # 4560B-P

 to handle a RIMMED plastic drum 

(figure 2.2).  Install the Top Rim Clamp Kit to handle a RIMMED 

plastic, steel or fiber drum with suitable top rim.

Figure 2.2

 

Kit # 4560B-P

  

Top Rim Clamp

 

to handle RIMMED plastic 

drum

Figure 2.1

 

Kit # 4556-P

  

Bracket Assembly 

 

to handle RIMLESS or 

RIMMED plastic drum

Содержание 8A-GT-125






Отзывы: