morsedrum.com
Copyright 2022 - Morse Mfg. Co., Inc.
Form PL520M-124 (249855-______)
(Updated 2 Mar, 2022)
3
The Specialist In Drum Handling Equipment
Model 520M-124
Vertical-Lift, 106”, with Spark Resistant Parts,
Air Power Lift, Manual Tilt
Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 520M-124
Serial Number 249855 to ______
Machine Description
Model 520M-124 Vertical-Lift Drum Pourer will pour a drum at up to 106” (269
cm) high, measured from the floor to lowest point of a horizontal drum. It is
designed to lift, transport and dispense a ribbed 55-gallon (210 liter) steel or fiber
drum drum 22.5” (56 cm) in diameter, as well as a fiber drum between 22” and
23.5” (56 to 59.7 cm) in diameter.
Maximum full-drum capacity is 800 Lb. (363 kg). Capacity is derated to 500
Lb. (227 kg) for a half-full drum. Half-full rating is based on the tilt mechanism’s
capacity for handling an unbalanced, bottom-heavy drum.
Hand Wheel
Kit # 2690M-P
16” (40.6 cm) diameter
Hand Wheel
with speed knob.
Replaces standard
Pull Chain to turn drum.
Kit for customer
to install on
EXISTING manual
tilt drum handler.
MORStop
TM
Tilt-Brake
Kit # 3900-P
Automatically holds
drum tilt angle until
you move it.
Kit for customer
to install on
EXISTING manual
tilt drum handler.
55/30M Series Spark Resistant Diameter Adapters
for drum with diameter
smaller than 22” (56 cm). To handle a smaller drum, insert the correct size
Diameter Adapter into the standard drum holder. See Diameter Adapter info at:
https://morsedrum.com/products/diameter-adapters
ONLY Diameter Adapters for drum with 17.5” (44.5 cm) diameter or smaller
have integrated brackets to prevent drum slipping length-ways.
NOTE:
For 30-gallon (114 Liter) PLASTIC drum, insert Diameter Adapter;
AND
install Bracket or Top Rim Clamp to prevent drum slipping.
IMPORTANT:
To prevent 30 to 55 gallon (114 to 210 L) size plastic drum from
slipping, you
MUST
install either Top Rim Clamp Kit or Bracket Assembly Kit.
1.
Bracket Assembly Kit # 4556M-P
is
required
to handle a RIMLESS
plastic drum (figure 2.1), and is also recommended for a fiber drum.
The Bracket adjusts for a 31” to 39” (79 to 99 cm) tall drum.
You can also handle a rimmed drum with the Bracket installed.
2. Top Rim Clamp Kit # 4560BM-P
to handle a RIMMED plastic drum
(figure 2.2). Install the Top Rim Clamp Kit to handle a RIMMED
plastic, steel or fiber drum with suitable top rim.
ACCESSORIES
Figure 2.2
Kit # 4560BM-P
Install Top Rim Clamp Kit
with Spark Resistant parts
to handle RIMMED plastic
drum
Figure 2.1
Kit # 4556M-P
Install Bracket Assembly Kit
with Spark Resistant parts
to handle RIMLESS or
RIMMED plastic drum
