morse 515-N-120 Скачать руководство пользователя страница 4

Страница: 4 / 6

The Specialist In Drum Handling Equipment

Model 515-N-120

Vertical-Lift Drum Pourer, Scale-Equipped,

60”, AC Power Lift, Manual Tilt

Operator’s Manual for Morse Model 515-N-120

with Serial Number 249855 to ______

morsedrum.com

Form OM515-120 (249855-______)

(Updated 24 Feb, 2022)

Controls

The Morse Vertical-Lift Drum Pourer is manually propelled and steered. The drum lift is

There are two functions for the operator to control (Figure 3.1).

1. LIFT and Lower Function for vertical positioning of the drum.

a. Plug the motor into a standard 115V power supply.

b. Turn the motor on by holding the momentary switch in the on position. The drum will

lift.

c. Release the momentary switch when the drum is at the desired height.

d. To lower the drum: With the motor off, push in the LOWER handle.

2. TILT Function to control the degree of rotation of the drum.

a. Turn the hand crank to turn the drum.

b. Before releasing your grip on the hand crank, pull out the crank stop pin to block the

hand crank from spinning freely.

c. If the drum handler is equipped with the MORStop Tilt-Brake, there is no need to use

the stop pin. Braking is immediate and self-actuating, without additional steps by the

operator.

Note: To add the MORStop Tilt-Brake to an existing drum handler, order part # 3900-P

for a field installation kit.

WARNING

- Watch out for pinch points

Stay clear of moving parts. Operator should remain behind the

push handle during the lift operation.

Floor Lock

Floor lock handle is located on left side of push handle. Pulling floor lock handle

toward operator until it locks in down position activates the floor lock. When floor lock

is activated it prevents unwanted free wheeling of unit. Floor conditions determine

effectiveness of floor lock. Operator should verify its holding action before depending on

it to hold.

Drum Holder Assembly

MORCINCH

Drum Holder assembly (“saddle”) is the component on Vertical-Lift Drum Pourer intended to hold drum. Carriage assembly

moves vertically along mast to position drum holder assembly at correct height to secure drum around it’s middle using cinch chain and

ratchet tightening system.

The MORCINCH

Drum Holder accepts accessories to handle plastic drum, fiber drum, or a smaller diameter drum.

Scale

The scale is simple to use and to read enabling accurate batching by weight. The touch pads include numbers for tare entry. Four load

cells accurately sense weight regardless of drum tilt angle. Battery saving “sleep” mode turns indicator off when scale is not in use.

Display weight to 0.1 Lb. with accuracy of +/-0.2 %

Scale components will be installed and calibrated before leaving the Morse factory. However, the rigors of

transportation may change scale calibration. To assure proper accuracy, the user should employ local scale service

personnel to check the function and calibration of the scale. Cost of on-site calibration is not included in the selling

price.

N-Type Scale

Economical general purpose instrument for use in a variety of weighing applications. NOT for use in hazardous areas.

Figure 3.1

“N” Type scale

indicator NOT

for hazardous

environments.

Содержание 515-N-120







Результаты поиска

Содержание 515-N-120

Отзывы:

morse 515-N-120, Руководство оператора, Страница: 4 / 6

Результаты поиска

Содержание 515-N-120

Отзывы: