background image

The Specialist In Drum Handling Equipment

Model 515-N-110

Vertical-Lift Drum Pourer, Scale-Equipped,  

60”, AC Power Lift and Tilt

Operator’s Manual for Morse Model 515-N-110

with Serial Number 249855 to ______

morsedrum.com

Copyright 2022  -  Morse Mfg. Co., Inc. 

 

Form OM515-110 (249855-______) 

(Updated 18 Feb, 2022) 

2

Safety Information

 (continued)

DANGER 

- Indicates a situation which, if not avoided, 

will

 result in serious injury or death. 

This signal word is limited to the most extreme situations.

WARNING 

- Indicates a situation which, if not avoided, 

could

 result in serious injury or 

death.

CAUTION 

- Indicates a situation which, if not avoided, can result in damage to the machine.

CAUTION 

-

 

Do NOT transport with drum raised. 

 

Always lower the drum holder to lowest position before transporting.

DANGER 

- Stay well clear of power lines. 

 

Never approach a power line. Current in a high voltage line may arc some distance from the wire to 

the steel framed, grounded machine.

WARNING 

- The Vertical-Lift Drum Pourer is designed to handle one drum of the types listed at the 

top of page 3 - Machine Description. DO NOT attempt to handle any other type of drum or object.  

DO NOT exceed the weight capacity of 800 Lb. (363 kg).

WARNING 

- Level floors only. 

 

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, 

ramps, irregular or debris strewn floors.

WARNING 

- Do NOT modify the unit. 

 

Under no circumstances should any modifications be made to the Morse machinery without factory 

authorization. Any modifications may void the warranty. This machine was designed to perform a 

specific job and alterations may result in injury to operator or machine.

WARNING 

- No loose fitting clothing. 

 

Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may 

become caught on the machinery and cause severe personal injury.

WARNING 

- Hydraulic fluid under pressure can be hazardous. 

 

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the 

hazard by relieving pressure before disconnecting hydraulic lines. Keep hands and body away from 

pinholes and nozzles, which eject fluid under high pressure. Use a piece of cardboard to search for 

leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION 

- Wear safety shoes. 

 

Wear safety shoes with non-slip soles and hard toe protection.

WARNING: 

This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the 

State of California to cause birth defects or other reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

Содержание 515-N-110







Отзывы: