The Specialist In Drum Handling Equipment
Model 510SS-114
Stainless Steel Vertical-Lift Drum Pourer,
60”, Air Power Lift and Tilt
Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 510SS-114
Serial Number 275066 to ______
morsedrum.com
Copyright 2022 - Morse Mfg. Co., Inc.
Form OM510SS-114 (275066-______)
(Updated 11 Feb., 2022)
4
Controls
The Morse Vertical-Lift Drum Pourer
is manually propelled and
steered. The hydraulic pump is powered by a vane type air
motor. The air motor is control by a momentary air valve
located on the air motor. Attach air supply to the air valve.
There are two functions for the operator to control (Figure 3.1):
1. LIFT and lower function for vertical positioning of the drum.
• To raise the drum, hold the air valve handle in the on
position and raise the LIFT handle. Release the two
valve handles when desired drum height is reached.
• To lower the drum, push in the LOWER handle. Air
motor is not needed.
2. TILT function to control the degree of rotation of the drum.
• To tilt the drum forward for pouring, hold the air valve
handle in the on position and raise the TILT handle.
Release the two valve handles when drum angle is
reached.
• To return the drum to vertical position, hold the air valve
handle in the on position and push down on the TILT
handle.
WARNING
- Watch out for pinch points
Stay clear of moving parts. Operator should remain behind the push handle during the lift operation.
Floor Lock
Floor lock handle is located on left side of push handle. Pulling floor lock handle toward operator until it locks in down position activates
the floor lock. When floor lock is activated it prevents unwanted free wheeling of unit. Floor conditions determine effectiveness of floor
lock. Operator should verify its holding action before depending on it to hold.
Drum Holder Assembly
MORCINCH
TM
Drum Holder assembly (“saddle”) is the component on Vertical-Lift Drum Pourer intended to hold drum. Carriage assembly
moves vertically along mast to position drum holder assembly at correct height to secure drum around it’s middle using cinch chain and
ratchet tightening system.
The MORCINCH
TM
Drum Holder accepts accessories to handle plastic drum, fiber drum, or a smaller diameter drum.
Figure 3.1
