morsedrum.com
Copyright 2022 - Morse Mfg. Co., Inc.
Form OM510-114 (249855-______)
(Updated 18 Feb, 2022)
3
The Specialist In Drum Handling Equipment
Model 510-114
Vertical-Lift, 60”, Air Power Lift and Tilt
Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 510-114
Serial Number 249855 to ______
Machine Description
The Model 510-114 Vertical-Lift Drum Pourer will pour a drum at up to 60”
(152 cm) high, measured from the floor to the lowest point of a horizontal
drum. It is designed to lift, transport, and dispense a ribbed 55-gallon (210
liter) steel drum 22.5” (57 cm) in diameter, as well as a fiber drum between
22” and 23.5” (56 to 59.7 cm) in diameter.
The maximum full-drum capacity is 800 Lb. (363 kg). The capacity is
derated to 500 Lb. (227 kg) for a half-full drum. The half-full rating is based
on the tilt mechanism’s capacity for handling an unbalanced bottom-heavy
drum.
55/30 Series Diameter Adapters
for drum with diameter smaller than 22”
(56 cm). To handle a smaller drum, insert the correct size Diameter Adapter
into the standard drum holder. See Diameter Adapter info at:
https://morsedrum.com/products/diameter-adapters
ONLY Diameter Adapters for drum with 17.5” (44.5 cm) diameter or smaller
have integrated brackets to prevent drum slipping length-ways.
NOTE:
For 30-gallon (114 Liter) PLASTIC drum, insert Diameter Adapter;
AND
install Bracket or Top Rim Clamp to prevent drum slipping.
IMPORTANT:
To prevent 30 to 55 gallon (114 to 210 L) size plastic drum from
slipping, you
MUST
install either Top Rim Clamp Kit or Bracket Assembly Kit.
1.
Bracket Assembly Kit # 4556-P
is
required
to handle a RIMLESS
plastic drum (figure 2.1), and is also recommended for a fiber drum.
The Bracket adjusts for a 31” to 39” (79 to 99 cm) tall drum.
You can also handle a rimmed drum with the Bracket installed.
2.
Top Rim Clamp Kit # 4560B-P
to handle a RIMMED plastic drum
(figure 2.2). Install the Top Rim Clamp Kit to handle a RIMMED
plastic, steel or fiber drum with suitable top rim.
ACCESSORIES
Figure 2.2
Kit # 4560B-P
Install Top Rim Clamp Kit
to handle RIMMED plastic
drum
Figure 2.1
Kit # 4556-P
Install Bracket Assembly Kit
to handle RIMLESS or
RIMMED plastic drum
