The Specialist In Drum Handling Equipment
Kit # 4560-P
Kit, Rim Clamp Assembly
Operator’s Manual for Morse Rim Clamp Assembly Kit - Part # 4560-P
Serial Number 0615 to ____ (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL4560 (0615-____)
(Updated 9 Oct, 2019)
2
OPERATING INSTRUCTIONS
TO SECURE DRUM:
Turn hand wheel (item 2) counter clockwise to open top jaw.
1.
Position drum holder assembly with bottom jaw of rim clamp
2.
directly under top rim of drum.
Turn hand wheel clockwise until top jaw is pressing tightly
3.
against top of drum (see Figure 1).
Secure drum with chain and ratchet mechanism. Drum is
4.
now ready to be lifted and tilted.
TO RELEASE DRUM:
Lower drum to floor in an upright position.
1.
Release chain from ratchet mechanism by applying
2.
pressure to ratchet handle in a clockwise direction with one
hand and opening pawl to free ratchet with other hand.
Remove chain link from ratchet.
Open rim clamp by turning hand wheel counter clockwise.
3.
Figure 1
Plastic drum being lifted with
Rim Clamp Assembly Kit
installed.
WARNING:
This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
