The Specialist In Drum Handling Equipment
Model 410-114
Heavy-Duty Hydra-Lift, 72”, Air Power Lift & Tilt
Operator’s Manual for Morse Heavy-Duty Hydra-Lift Karrier Model 410-114
Serial Number 1210 to ____ (MMYY)
morsedrum.com
Copyright 2022 - Morse Mfg. Co., Inc.
Form OM410-114 (1210-____)
(Updated 24 Mar, 2022)
4
Figure 2.3
Controls
The Morse Heavy-Duty Hydra-Lift Karrier is manually propelled and steered.
The hydraulic pump is powered by a vane type air motor. The air motor is
control by a momentary air valve located on the air motor. Attach air supply to
the air valve.
There are two functions for the operator to control (Figure 2.3):
1. LIFT and lower function for vertical positioning of the drum.
•
To raise the drum, hold the air valve handle in the on position and
raise the LIFT handle. Release the two valve handles when desired drum
height is reached.
•
To lower the drum, push in the LOWER handle. Air motor is not
needed.
2. TILT function to control the degree of rotation of the drum.
•
To tilt the drum forward for pouring, hold the air valve handle in the on
position and raise the TILT handle. Release the two valve handles when
drum angle is reached.
•
To return the drum to vertical position, hold the air valve handle in the
on position and push down on the TILT handle.
WARNING
- Watch Out for Pinch Points
Stay clear of moving parts. Operator should remain behind the push handle during the lift operation.
Figure 3.1
Floor Lock
The step-down floor lock is located behind the base.
To activate, step down on the floor lock until it locks in
down position. When floor lock is activated it prevents
unwanted free wheeling of unit. Floor conditions determine
effectiveness of floor lock. Operator should verify its holding
action before depending on it to hold.
Drum Holder
MORCINCH
TM
Drum Holder assembly (“saddle”) is the
component on Vertical-Lift Drum Pourer intended to hold
drum. Carriage assembly moves vertically along mast to
position drum holder assembly at correct height to secure
drum around it’s middle using cinch chain and ratchet
tightening system. The MORCINCH
TM
Drum Holder accepts
accessories to handle plastic drum, fiber drum, or a smaller
diameter drum.
