background image

Safety Information (continued)

DANGER

 - Indicates a situation which, if not avoided, 

will

 result in serious

injury or death.  This signal word is limited to the most extreme situations.

WARNING

 - Indicates a situation which, if not avoided, 

could

 result in

serious injury or death.

CAUTION

 

- Indicates a situation which, if not avoided, can result in damage

to the machine.

CAUTION

 

– Do Not Transport with Drum Raised

ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING. 

 The unit

can become unstable when transporting with a raised load.

DANGER

 - Stay Clear of Power Lines

KEEP WELL CLEAR OF POWER LINES. 

 Never approach a power line.  Current in a high voltage line may

arc some distance from the wire to the steel framed, grounded machine.

WARNING

The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 

2.

Machine Description

.  

DO NOT

 attempt to handle any other type of drum or object.  

DO NOT

 exceed the

weight capacity of 800 Lb.

WARNING

 

- Level Floors Only

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps,

irregular or debris strewn floors.

WARNING

 - Do Not Modify the Unit

Under no circumstances should any modifications be made to the Morse machinery without factory authorization.

Any modifications may void the warranty.  This machine was designed to perform a specific job and alterations

may result in injury to operator or machine.

WARNING

 - No Loose Fitting Clothing

Wear close-fitting clothing and safety equipment appropriate to the job.  Loose fitting clothing may become

caught on the machinery and cause severe personal injury.

WARNING

 - Hydraulic Fluid Under Pressure Can Be Hazardous

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.  Avoid the hazard by

relieving pressure before disconnecting hydraulic lines.  Keep hands and body away from pinholes and

nozzles, which eject fluid under high pressure.  Use a piece of cardboard to search for leaks. If an accident

occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION

 - Wear Safety Shoes

Wear safety shoes with non-slip soles and hard toe protection.

Copyright 2007  -  Morse Mfg. Co., Inc.

Form PL400-96-115 (0804-____)   (Updated 4/2007)

Page 2

Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-96-115

Serial Number 0804 to ____ (MMYY)

The Specialist In Drum Handling Equipment

MODEL 400A-96-115

Hydra-Lift, 96”, DC Power Lift & Tilt

Содержание 400A-96-115










Отзывы: