morse 400A-96-110 Скачать руководство пользователя страница 2

Safety Information (continued)

DANGER

 - Indicates a situation which, if not avoided, 

will

 result in 

serious injury or death.  This signal word is limited to the most extreme 

situations.

WARNING

 - Indicates a situation which, if not avoided, 

could

 result in 

serious injury or death.

CAUTION

 

- Indicates a situation which, if not avoided, can result in 

damage to the machine.

CAUTION

 

– Do Not Transport with Drum Raised

ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING. 

 The unit 

can become unstable when transporting with a raised load.

DANGER

 - Stay Clear of Power Lines

KEEP WELL CLEAR OF POWER LINES. 

 Never approach a power line.  Current in a high voltage line 

may arc some distance from the wire to the steel framed, grounded machine.

WARNING

The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 

2.  

Machine Description

.  

DO NOT

 attempt to handle any other type of drum or object.  

DO NOT

 exceed 

the weight capacity of 800 Lb.

WARNING

 

- Level Floors Only

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, 

ramps, irregular or debris strewn floors.

WARNING

 - Do Not Modify the Unit

Under no circumstances should any modifications be made to the Morse machinery without factory autho

-

rization.  Any modifications may void the warranty.  This machine was designed to perform a specific job 

and alterations may result in injury to operator or machine.

WARNING

 - No Loose Fitting Clothing

Wear close-fitting clothing and safety equipment appropriate to the job.  Loose fitting clothing may be

-

come caught on the machinery and cause severe personal injury.

WARNING

 - Hydraulic Fluid Under Pressure Can Be Hazardous

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.  Avoid the hazard 

by relieving pressure before disconnecting hydraulic lines.  Keep hands and body away from pinholes and 

nozzles, which eject fluid under high pressure.  Use a piece of cardboard to search for leaks. If an acci

-

dent occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION

 - Wear Safety Shoes

Wear safety shoes with non-slip soles and hard toe protection.

Copyright 2009  -  Morse Mfg. Co., Inc.   

Form PL400-96-110 (0804-0309)   (Updated 3/2009) 

 

Page 2

The Specialist In Drum Handling Equipment

Model 400A-96-110

Hydra-Lift, 96”, AC Power Lift & Tilt

Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-96-110 

Serial Number 0804 to 0309 (MMYY)

Содержание 400A-96-110










Отзывы: