The Specialist In Drum Handling Equipment
Model 456-1-50-CE & 456-3-50-CE
CE-Marked Hydra-Lift Drum Rollers
operator’s Manual for Morse 456-CE series CE-Marked Hydra-Lift Drum Rollers
serial number 278575 to ______
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL456-CE (278575-______)
(Updated 17 Oct, 2019)
2
safety Information
(continued)
DAnGER
- Indicates a situation which, if not avoided, will result in serious injury or death.
This signal word is limited to the most extreme situations.
WARnInG
- Indicates a situation which, if not avoided, could result in serious injury or
death.
CAUtIon
- Indicates a situation which, if not avoided, can result in damage to the machine.
DAnGER
- Watch Out for Pinch Points. Stay clear of moving parts. Do Not Stand Near any Part of a Rotating Drum
or Drum Holder. Operator should remain directly in front of the control station while operating the rotator. Morse CE-
Marked Drum Rotators comply with OSHA subpart O, 1910.212 - “General requirements for all machines.” “Revolving
drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that
the barrel, drum, or container cannot revolve unless the guard enclosure is in place.” (A safety enclosure is included
with each CE-Marked MORSE drum rotator.)
WARnInG
- The 456-CE Series is designed to handle one drum of the types listed at the top of page 3 under machine
description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight capacity.
WARnInG
- Level Floors Only. For operation only on clean, level floors of suitable bearing capacity. Do not use on
sloped surfaces, ramps, irregular or debris strewn floors.
WARnInG
- Properly Mount to Floor. Do Not put into service without proper floor mounting and leveling. Use the four
mounting holes in each corner of the base to anchor to floor.
WARnInG
- Do Not Modify the Unit. Under no circumstances should any modifications be made to the Morse
machinery without factory authorization. Any modifications may void the warranty. This machine was designed to
perform a specific job and alterations may result in injury to operator or machine.
WARnInG
- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate to the job. Loose
fitting clothing may become caught on the machinery and cause severe personal injury.
WARnInG
- Hydraulic Fluid Under Pressure Can Be Hazardous. Escaping hydraulic fluid under pressure can penetrate
the skin, causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic lines. Keep
hands and body away from pinholes and nozzles which eject fluid under high pressure. Use a piece of cardboard to
search for leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.
CAUtIon
- Wear safety shoes with non-slip soles and hard toe protection.
CAUtIon:
DO NOT allow drum to impact on floor.
WARnInG:
This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
