The Specialist In Drum Handling Equipment
Model 2-15
Double 5-Gallon Can Tipper
Morse Model 2-15 Double 5-Gallon Can Tipper
Made Oct. 2006 to present
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL2-15 (1006-____)
(Updated 17 Jun, 2019 1:19 PM)
3
ITEM
QTY.
PART #
DESCRIPTION
1
2
1687-P
CAN HOLDER ASM, 15
2
4
4234-P
SHCS, 3/8-24 X 7/8
3
2
1686-P
SCREW, 5/16-18 X 3/4 THUMB
4
2
4283-P
CATCH ASM, 15 W/ SCREW
5
8
1518-P
NUT, 1/4-20 NYLON LOCK
6
4
1517-P
SCREW, 1/4-20 X 5/8 PAN HEAD
7
1
4323R-P
SIDE BRACE, RIGHT, 2-15
8
4
1714-P
HHCS, 1/4-20 X 3/4 GR2
9
1
4277-P
BASE ASM, 15 SERIES
10
1
4281-P
CENTER BRACE, 15
11
1
4323L-P
SIDE BRACE, LEFT, 2-15
Assembly Instructions
1. Please unpack and identify the following parts:
2 - Can holders with catches
1 - Base
1 - Center brace
2 - Side braces (left and right)
4 - 1/4-20 x 5/8 Panhead screws
8 - 1/4-20 Two way lock nuts
4 - 1/4-20 x 3/4 Hex head cap screws
2. Spread base (item 9) open, hinging at riveted joints.
3. Align side braces (items 7 and 11) and center brace (item 10)
with center hole in base (item 9). Note: Ensure left and right side
braces are on correct sides with holes for lower can holder pivot
points 17-1/2” high.
4. Fasten braces to base using two 1/4-20 x 3/4 hex head cap
screws (item 8) and 1/4-20 lock nuts (item 5).
5. Attach center brace (item 10) to rear uprights of base (item 9)
with 1/4-20 x 5/8 panhead screws (item 6) and 1/4-20 lock nuts
(item 5).
6. Place bottom can holder between side braces as shown. Insert
1/4-20 x 3/4 hex head cap screws (item 8) from inside of loop
through holes in can holder ring, side braces and rear brace up
-
rights. Thread 1/4-20 lock nuts (item 5) onto screws but do not
tighten completely. Nuts should be just loose enough to allow
can holder to pivot freely.
7. Place top can holder between side braces. Fasten with 1/4-20 x
5/8 panhead screws (item 6) and 1/4-20 lock nuts (item 5) allow
-
ing can holder to pivot freely as on step 6.
8. Place a few drops of oil on pivot screws before using, and peri
-
odically, to minimize wear.
