Morrison YT5461-01, Руководство пользователя, Страница: 8 / 12

8
freshness and condition, the maximum branch diameter may
be smaller.
• Shredding wet garden waste results in a clog. To prevent the
machine from clogging, alternate waste with wood containing
material.
• Soft material or wet branches may be torn instead of being cut.
Worn counter blade may also cause this problem.
8
13
Adjusting the blade clearance
For an effective operation, adjust the clearance between the counter
blade and cutting roller, if required.
Setting the clearance:
1. Switch on the device.
2. Turn the fixing knob counterclockwise to release the hexagon
socket-head bolt.
3. Slowly turn the hexagon socket-head bolt by Allen key
clockwise until the counter plate touches the stopper.
4. Turn the fixing knob clockwise to lock the hexagon
socket-head bolt.
Warning!
Failure to follow these instructions will cause damage to the
machine
REVERSE SWITCH
The shredder is fitted with a Reverse switch to enable the removal
of jammed material. If material becomes jammed stop the machine
by pressing the OFF button. When the machine has come to a
complete stop change the direction of rotation of the machine
by pressing reverse arrow of reverse switch and pressing the ON
button ( note that the machine will not latch ON while in reverse
-- the button has to be held down). When the blockage has cleared
stop the machine and return the Reverse switch to its original
position. Do not continue to run the machine in reverse mode as
this could cause injury to the operator or damage to the machine.
Maintenance
CAUTION:
• Always be sure that the machine is switched off and unplugged
before performing inspection or maintenance.
• Wear protective groves before performing inspection or
maintenance.
• The cutter does not stop immediately after switch off.
• Wait until all the parts stop before performing any maintenance
work.
• Make sure that all the tools are removed after maintenance
work.
• Never use gasoline, benzine, thinner, alcohol or the like.
Discoloration, deformation or cracks may result.
• To clean the machine, use only moist cloth and soft brush.
• Do not hose or clean the machine with high pressured water.
After each operation, perform the following maintenance:
•
Check whether all the locking screws are tight (tighten if
necessary).
• Lubricate metal parts to protect them against corrosion.
• Keep the vents clean and free from dust.
The cutting roller and counter blade wears out in course of time.
Ask your nearest authorized service centre for replacement parts
when it is necessary.
Technical Data
Model
YT5461-01
Name Electric Shredder
Motor AC-Motor 230-240V, ~50Hz
Motor rating P1 S6-40% 2,400W
Motor rating P1 S1 2,000W
Rotational speed cutting
roller 40 min
–1
Power switch with overload protection; cutting and
reverse function, zero- voltage
initiator
Weight 25 kg
Max. branch diameter
(only for freshly cut wood) Max. 40 mm
Safety class I
Protection class IP X4
NOISE DATA
Measured sound power level 89.33dB(A)
K=2.39dB(A)
Guaranteed LwA 92.0dB(A)
The sound intensity level for operator may exceed 80 dB (A). Wear
ear protection.