3
Do not operate this machine before it has been
assembled correctly and you have read and understood
these instructions.
Keep the instructions in a safe place for future use.
Symbols on the Machine
2 STROKE FUEL MIXTURE
USE 25ml OIL PER LITRE OF PETROL
Symbols in this Owner’s Manual
Threatened hazard or hazardous situation.
Not observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling.
Not observing this instruction can lead to faults
in the machine.
User information.
This information helps you to
use all the functions correctly.
Proper Use
For safety reasons, the Brushcutters are not to be used by children,
young people under 16 years of age, or any other persons who are
not acquainted with these directions for use.
Specific safety information Please read this safety information and
the directions for use carefully and be sure to follow the instructions
to the letter.
1. This machine should never be used for anything other than the
purpose for which it has been designed.
2. Do not use this brush cutter when tired or drowsy or under the
influence of medication or alcohol, or at any time when you
may not be able to operate it safely.
3. Avoid running the engine indoors. The exhaust gases contain
harmful carbon monoxide.
4. Never use the machine in the circumstances described below:
-
When the ground is slippery or when other conditions
exist which might make your footing unsteady.
-
At night or in times of fog where it would not be possible
to have a clear view of the cutting area.
-
During rain or electrical storms, during gale force winds
or at any time when weather conditions might make use
of the product unsafe.
5. Before using this product for the first time, get an experienced
operator to show you how to use the machine.
6. When you are new to the machine, limit your work sessions
to 30-40 minutes with a 10 minute break between, and a total
working time of 2 hours per day. Accidents can be caused by
tiredness and physical exhaustion.
7. Be sure to keep this manual handy so that you may refer to it
later if any questions arise.
8. Always be sure to include this manual when selling, or lending,
this machine.
9. Never allow children or anyone to use this machine if they
cannot fully understand the directions given in this manual.
WORKING GEAR AND CLOTHING
When using your brush cutter, you should wear long, close fitting
trousers and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors
You should carry with you the following things as appropriate.
a.
Reserve fuel
b.
A spare blade
c.
Something to indicate your working area. (Yellow rope,
warning signs)
d.
Hatchet or saw (for removal of obstacles)
Never use your brush cutter when barefoot or in sandals or wearing
trousers with loose cuffs.
FUEL HANDLING WARNING
1. The engine of this product is designed to run on a mixture of
highly flammable petrol and oil. Do not store cans of fuel or refill
the fuel tank in any place where there is a boiler, stove, wood
fire, electrical or welding sparks, or any other source of heat or
fire which might ignite the fuel.
2. Smoking while operating the brush cutter or refilling its fuel tank
is extremely dangerous. Always be sure to keep lit cigarettes
away from the brush cutter at all times.
3. When refilling the tank always turn off the engine first, wait for it
to cool, and take a careful look around to make sure that there
is nothing nearby which might ignite spilled fuel.
4. To avoid spilling fuel, always use a funnel when filling the fuel
tank.
5. If any fuel spillage occurs during refuelling, use a dry rag to
wipe up the spillage before starting the engine again.
6. After refuelling, screw the fuel cap back tightly onto the fuel
tank and then carry the brushcutter to a spot 3m or more away
from where it was refuelled before starting the engine.