5
Removing transit bolts
1. Before operating the washer, remove the
WUDQVLWEROWVHDDORQJZLWKWKHUXEEHU
,IWKHEROWVDUHQRWUHPRYHGLWPD\FDXVH
heavy vibration, noise and malfunction.
2. Unscrew the 3 bolts with the 10mm hex
wrench or spanner or cross-tip screwdriver.
Keep the 3 bolts for a later time.
:KHQWKHDSSOLDQFHLVWUDQVSRUWHGWUDQVLW
bolts will be re-used.
3. Close the holes with the cap holders supplied.
Location of washer
&KHFNORFDWLRQZKHUHWKHZDVKHUZLOOEHLQVWDOOHG0DNHVXUH\RXKDYHHYHU\WKLQJQHFHVVDU\
for correct installation.
'RQRWSODFHRUVWRUH\RXUZDVKHUEHORZÝ&Ý)WRDYRLGDQ\GDPDJHIURPIUHH]LQJ
'RQRWSODFHRUVWRUHODXQGU\SURGXFWVRQWRSRIZDVKHUDWDQ\WLPHV
,QVWDOOWKHZDVKHURQWKHKRUL]RQWDOVROLGIORRU
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibrate severely and cause a malfunction. If the
washer is not level, adjust leg up or down for horizontal installation.
9HQWLODWLRQRSHQLQJVPXVWQRWEHREVWUXFWHGE\FDUSHWLQJZKHQWKH
washer is installed on a carpeted floor.
/HDYHVRPHVSDFHULJKW OHIWFPUHDUFP
,QFDVHRIEXLOWLQLQVWDOODWLRQWKHGLVWDQFHEHWZHHQWRSRIWKHZDVKHU
and bottom of upper plate should be at least 3mm.
INSTALLATION INSTRUCTIONS
Drain Hose
Washer
Laundry
Tub
approx.
2cm
?,?!!G૯൘༺)51:QVLL
!ፎ"