Morris WBW-71011/2 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 20

Morris WBW-71011/2 Скачать руководство пользователя страница 5

5

INSTALLATION INSTRUCTIONS

Removing transit bolts

1. Before operating the washer, remove the transit

bolts(3ea) along with the rubber.
• If the bolts are not removed, it may cause heavy

vibration, noise and malfunction.

2. Unscrew the 3 bolts with the 10mm hex wrench or

spanner or cross-tip screwdriver. Keep the 3 bolts
for a later time.
• When the appliance is transported, transit bolts

will be re-used.

3. Close the holes with sticker holders supplied.

Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct

installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any times.
• Install the washer on the horizontal solid floor.

If the washer is installed on an unsuitable floor, it could make considerable noise,
vibrate severely and cause a malfunction. If the washer is not level, adjust leg up
or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the washer is

installed on a carpeted floor.

• Leave some space (right & left : 2cm, rear : 10cm).
• In case of built-in installation, the distance between top of the washer and bottom of

upper plate should be at least 3mm.

Inlet hose connection

• The washer should be connected to the water mains using new hose set and old hose sets should not be

reused.

• In case of only one water inlet valve, connect the inlet hose to the cold water tap.

• Periodically check the tightness of the inlet hose.
• Make sure that the inlet hose is not kinked or folded and that it is not crushed.

1. Connect the inlet hose to

the water tap tightly.

2. Connect the inlet

hose to the water
inlet valve tightly.

Washer

approx.

2cm

Drain Hose

Laundry
Tub

«
...
3
4
5
6
7
...
»

Содержание WBW-71011/2





















Отзывы:

Нет отзывов