Morris WBG-18132, Руководство пользователя и инструкции по установке, Страница: 10 / 28

About the washer features.
10
The Dispenser Drawer
Slowly open the dispenser drawer by pulling
it out until it stops.
After adding laundry products, slowly close
the dispenser drawer. Closing the drawer too
quickly could result in early dispensing of the
bleach, fabric softener or detergent.
You may see water in the dispenser drawer
at the end of the cycle. This is a result of the
flushing/siphoning action and is part of the
normal operation of the washer.
The Detergent Compartment
„
High-efficiency detergent is required for this
washer. Use the detergent manufacturer’s
recommended amount.
„
Add measured detergent to the front left
detergent compartment of the dispenser
drawer.
„
Detergent is flushed from the dispenser
at the beginning of the wash cycle. Either
powdered or liquid detergent can be used.
„
Detergent usage may need to be adjusted for
water temperature, water hardness,
size and soil level of the load. Avoid using too
much detergent in your washer as it can lead
to oversudsing and detergent residue being
left on the clothes.
„
Using more detergent than the recommended
quantity can cause residue buildup on your
washer.
The Prewash Compartment
„
Only use the Prewash Compartment if
you are selecting the Prewash
cycle for heavily soiled clothes. Add
measured detergent or prewash additive
to the back left prewash compartment of
the dispenser drawer.
„
Detergent or prewash additive is flushed
from the dispenser in the prewash
cycle (if selected).
NOTE: Liquid detergent will drain into the
washer drum as it is added.
„
Detergent usage may need to be adjusted
for water temperature, water hardness, size
and soil level of the load. Avoid using too
much detergent in your washer as it can
lead to over sudsing and detergent residue
being left on the clothes.
Remove for powder detergent
Max HE
Liquid
Detergent
Setting
2X HE Liquid
Detergent Seting
(most common
setting)
3X HE
Liquid
Detergent
setting
„ Powder Detergent – Remove the Detergent
selection insert and place it in a safe
location outside of the washer. Follow the
detergent manufacturer’s instructions
when measuring the amount of powder to
use.
„ Liquid Detergent – Locate the
concentration of your detergent on the
bottle. Place the Detergent selection insert
in the corresponding location depending on
the concentration.