SPECIAL SAFEGUARDS for this device
•
Stand the appliance on a table or flat surface.
•
Do not use or keep this product outside when it is raining.
•
Do not store the appliance near hot ovens or heating appliances.
•
Certain parts of the appliance can get hot. Do not touch them, as you may burn yourself.
•
Never modify the appliance in anyway.
•
Use only cold water when filling the device.
•
The water level must be between the MAX and MIN mark.
•
Switch the device off before removing it from the base.
•
Always ensure that the lid is tightly closed.
•
The base and exterior of the kettle must not become wet.
•
Make sure the body of the device matches with the base.
USE OF THE MACHINE
Before using the machine for the first time
,
r
inse the inside
with fresh water
.
1. Fill half of the tank
with
fresh water
.
2. Put the switch on "ON"
position
.
The light
turns
on, showing that water begins heating up.
3.
After
boiling, the apparatus
will turn off
automatically
4. Raise the device body carefully and empty water in a sink by watching out not to splash (risk of
scald).
5. The apparatus is ready to be used again.
WHILE USING
1. Put the electric charger base on a flat surface.
2. Fill the device with fresh water (without any additives).
Νote:
Do not overfill! Use the water level indicator.
3. Place the cover
.
4. Place the device on its base.
5. Only connect the machine to a properly installed 220V~ 60Hz safety socket.
(check whether the electrical voltage that you intend to use is the same as that of the
machine. Details
are to be found on the label on the base)
.
6. Change the switch of the device
to position “1”. The control lamp on the device illuminates,
showing that the
water is heating.
7. While the water starts boiling, the
device
will turn
off automatically.
8. Lift the device and pour the water in
a
safe container.
Note:
Take care to avoid any burn.
Do not press up the lid when pouring.
MAINTENANCE
AND CLEANING
Before cleaning
,
switch off the
device
.
Always disconnect
it a
nd let it cool before cleaning.
Clean the outside of the
device
with a sponge or slightly wet linen.
Never
immerse
the
body or the base of the device
in water or
any
other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another sharp object
for cleaning
.
3
