Morris PG4VQ251CFT, Инструкция по эксплуатации

Страница: 15 / 27

15
OPERATION
Switching on the appliance
When the appliance is switched off then all the
cooking zones are disconnected and the indicators
are off. Touch the on/off sensor field (1) to switch on
the appliance. „0” will appear on all cooking zone
displays (3) for 10 seconds. After selecting a desired
cooking zone by touching the cooking zone selector
sensor field (2) (see „Setting the heating power”),
now the desired heat setting can be selected using
the (+)(5) or (-)(4) sensor fields .
If none of the sensor fields is touched within 10 seconds, the appliance swit -
ches itself off.
If child lock function is activated, the appliance cannot be switched on (see
„Releasing the child lock”).
Switching on the cooking zones
Control Panel
When the cooking surface is connected to the
electricity mains, the pilot light should light up
briefly above the child lock sensor field (7), after
which the appliance can be switched on.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
After switching on the appliance using the on/off
sensor field (1) cooking zones can be operated
as follows:
1. Select the desired cooking zone using the
cooking zone selector sensor field (2). (Sensor
field layout reflects the layout of individual co -
oking zones),
2. Set the desired heat setting using the (+)(5) or
(-)(4) sensor fields,
3. To change the heat setting again as described
in point 1, select the desired cooking zone using
the cooking zone selector sensor field (2), and
then set the desired heat setting using the (+)
(5) or (-)(4) sensor fields.
If none of the sensor fields is touched within 10 seconds, the cooking zone
switches off.
A cooking zone is active when a dot is displayed by the number „ ” on the
cooking zone display. This indicates a cooking zone is ready for the heat setting
to be set or changed.
7
2
1
2 2
3
3
3
3
4
5
2
2 2
4
5