Please pay attention to use the drying machine if the materials of your clothes can not be
dried by it or contain the symbols as follows:
Dry
Dry clean
Line dry / hang to dry
Drip dry
Do not dry clean
Normal
Do not dry
In the shade
Dry flat
Not tumble dry normal
Dry clean normal cycle
with any solvent
Dry clean normal cycle
petroleum solvent only
OPERATIONS
OPERATIONS
11
12
Control Panel
2
1
3
5
4
Bed Linen
On/Off
Product is switched on or off.
11
Start/Pause
the button to start or pause the
drying cycle.
Press
12
Option
These buttons are used for setting
additional functions.
3
Display
This display shows the setting, estimated
remaining time and status messages of
your dryer.
4
Programmes
Different Dryer cycle can be selected
according to the user's needs to ensure
the clothes drying results are more
effective.
5
Option
Time
When the warm or cool or refresh programme is selected, the
【
Time
】
button can be
used to adjust the drying time in 10 min. steps.
Delay
This function is used for delaying clothes drying time within 24 hours. The delay time
means the programme will start after x hours. When the delay programme starts, the
time starts to countdown on the display and the delay icon blinks.
Steps in details:
1.Load your laundry and make sure the machine door is closed.
2.Press the
【
On/Off
】
button,then to turn the programme selector knob and select
a desired programme.
3.You can select the
【
Anti-Crease
】
or
【
Signal
】
functions according to your need
4.Press the
【
Delay
】
button.
5.Continue to press the
【
Delay
】
to select the delay time.
6.After the
【
Start/Pause
】
button is pressed, the Dryer is at the running condition.
The drying procedure will be automatically performed when the delay time is over.
7.If you press the
【
Start/Pause
】
button again, the delay function will be paused.
8.If you want to cancel the “Delay” function, please press the
【
On/Off
】
button.
Delay
Time
Intensity
Use for adjusting the dryness level of the laundry.
The level has four grades
.
The drying time increases 5 minutes in every grade.
1.The intensity function can be activated only before the programme starts.
2. Press the
【
Intensity
】
button repeatedly to select the drying time.
3.Except the
【
Cotton Iron
】【
Delicate
】【
Wool
】【
Warm
】【
Cool
】【
Refresh
】
, all
the other programmes can be set with the
【
Intensity
】
function.
Intensity
